Express 1/2 Ton Van AWD V8-5.3L VIN T (2003)
Involved are certain 2003 model year Buick Rendezvous; 2003 model year Cadillac CTS; 2001 model year Chevrolet Venture; 2002 model year
Chevrolet TrailBlazer; 2003 model year Chevrolet Express, Monte Carlo, TrailBlazer, TrailBlazer EXT, Venture; 2002 model year GMC Envoy; 2003
model year GMC Envoy, Envoy XL, Savana; 2001 model year Oldsmobile Alero; 2002 model year Oldsmobile Bravada; 2003 model year Oldsmobile
Bravada; 2001 model year Pontiac Aztek, Grand Am, Montana; 2002 model year Pontiac Aztek; 2003 model year Pontiac Aztek, Montana vehicles built
within the VIN breakpoints shown.
IMPORTANT:
Dealers should confirm vehicle eligibility through their Campaign Initiation Detail Report. VINS will not be loaded into GMVIS (GM Vehicle
Inquiry System) or GM Access Screen (Canada only) Computer listings containing the complete Vehicle Identification Number, customer name and
address data of involved vehicles have been prepared, and are being furnished to involved dealers with the recall bulletin. Any dealer not receiving a
computer listing with the recall bulletin has no involved vehicles currently assigned.
These dealer listings may contain customer names and addresses obtained from Motor Vehicle Registration Records. The use of such motor vehicle
registration data for any other purpose is a violation of law in several states/provinces/countries. Accordingly, you are urged to limit the use of this listing
for recall purposes.
PARTS INFORMATION
No parts are required for this recall.
SERVICE PROCEDURE
1.
Make a copy of the Owner's Manual Supplement shown in this bulletin.
2.
Insert the Supplement in the Owner's Manual.
3.
Install the GM Recall Identification Label.
RECALL IDENTIFICATION LABEL
Place a Recall Identification Label on each vehicle corrected in accordance with the instructions outlined in this Product Recall Bulletin. Each label
provides a space to include the recall number and the five-digit dealer code of the dealer performing the recall service. This information may be inserted
with a typewriter or a ballpoint pen.
Put the Recall Identification Label on a clean and dry surface of the radiator core support in an area that will be visible to people servicing the vehicle.
