Express 1/2 Ton Van AWD V8-5.3L VIN T (2003)
1. Remove the rear corner garnish molding.
2. Remove the seat belt retractor bolts (1).
3. Remove the seat belt retractor from the vehicle.
INSTALLATION PROCEDURE
1. Install the seat belt retractor to the vehicle.
2. Install the seat belt retractor bolts (1).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the seat belt retractor bolt to 52 N.m (38 lb ft).
3. Install the rear corner garnish molding.
