Express 1500 AWD V8-5.3L (2008)
1. Install the power steering cooler to the vehicle.
Notice: Refer to Fastener Notice .
2. Install the power steering cooler mounting bolts.
Tighten the bolts to 5 N.m (44 lb in).
3. Connect the power steering cooler hose to the power steering gear.
Tighten the hose fitting to 33 N.m (24 lb in).
4. Connect the power steering cooler hose to the power steering pump.
5. Lower the vehicle.
6. Bleed the power steering system. Refer to Power Steering System Bleeding (See: Steering and Suspension/Steering/Power Steering/Power
Steering Bleeding/Service and Repair) .
7. Remove the drain pan from under the vehicle.
Power Steering Cooler Pipe/Hose Replacement (GT5)
Power Steering Cooler Pipe/Hose Replacement (GT5)
Removal Procedure