Express 1500 AWD V8-5.3L (2008)
6. Install the wheel speed sensor mounting bolt to the wheel hub and bearing.
Tighten the sensor mounting bolt to 18 N.m (13 lb ft).
7. Install the wheel driveshaft retaining nut and washer.
Tighten the nut to 210 N.m (155 lb ft).
8. Install the front axle hub cap.
9. Install the rotor. Refer to Front Brake Rotor Replacement .
10. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Service and Repair) .
11. Lower the vehicle .
