Express 1500 AWD V8-5.3L VIN T (2004)
Refer to Fastener Notice in Service Precautions.
Install the screws to the EBCM (2).
^
Tighten the screws to 5 Nm (44 inch lbs.) in an X-pattern.
3. Connect the electrical connectors to the EBCM.
4. For cutaway vehicles, install the splash shield.
^
Tighten the splash shield bolts to 25 Nm (18 ft. lbs.).
5. Lower the vehicle.
6. Connect the negative battery cable.
7. Revise the tire calibration using the Scan Tool Tire Size Calibration function.
8. Verify correct system operation.
