Express 1500 AWD V8-5.3L VIN T (2004)
6. Install the brake hose to caliper bolt to the brake caliper.
^
Tighten the brake hose to caliper bolt to 44 Nm (32 ft. lbs.).
7. Bleed the hydraulic brake system.
8. Install the tire and wheel assembly.
9. Lower the vehicle.
10. Fill the master cylinder reservoir to the proper level with clean brake fluid.
Brake Caliper Overhaul - Front
Brake Caliper Overhaul - Front
Caution: Refer to Brake Dust Caution in Service Precautions.
Caution: Refer to Brake Fluid Irritant Caution in Service Precautions.
Disassembly Procedure
1. Caution:
Do not place your fingers in front of the piston in order to catch or protect the piston while applying compressed air. This could result in serious
injury.
Remove the brake caliper from the vehicle.
2. Place a thin piece of wood in front of the piston in order to prevent damage. Remove the piston by directing compressed air into the brake hose
inlet fitting port of the brake caliper housing.
