Express 1500 AWD V8-5.3L VIN T (2004)
10. Chamfer the inside and outside diameter of the pipe with the de-burring tool included in the J 45405.
11. Install the tube nuts on the brake pipe, noting their orientation.
12. Clean the brake pipe and the J 45405 of lubricant, contaminants, and debris.
13. Loosen the die clamping screw of the J 45405.
14. Select the corresponding die set and install the die halves into the die cage with the full, flat face of one die facing the clamping screw, and the
counterbores of both dies facing the forming ram.
