Express 1500 AWD V8-5.3L VIN T (2004)
2. Notice: Refer to Fastener Notice in Service Precautions.
Install the oil cooler hose adapter bolts (2).
Tighten the bolts to 12 Nm (106 inch lbs.).
3. Install the oil cooler hose bracket bolt (1).
Tighten the bolt to 25 Nm (18 ft. lbs.).
4. Install the oil cooler hoses to the hose clip on the fan shroud.
5. Snap the oil cooler hose clip shut.
6. Important:
^
Ensure the oil cooler line being installed has a plastic cap on the end that connects to the quick connect fitting. If no plastic cap exists, or the
plastic cap is damaged, obtain a new cap. Install the cap on to the cooler line prior to cooler line installation.
^
Do not use the plastic cap in order to install the cooler line into the fitting.
Connect the oil cooler lines.
7. Pull back sharply on the cooler line in order to ensure that the cooler line is installed in the quick connect fitting.
