Express 1500 AWD V8-5.3L VIN T (2004)
5. Install the evaporator inlet tube (4) to the evaporator (5).
6. Install the evaporator inlet tube retaining nut (3).
Tighten
Tighten the nut to 16 N.m (12 lb ft).
7. Install the evaporator outlet hose and retaining nuts (4,5).
Tighten
Tighten the nut to 18 N.m (13 lb ft).
8. Connect the low pressure sensor electrical connector.
9. Connect the blower motor electrical connector.
10. Connect the blower motor resistor assembly electrical connector.
11. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging.
12. Leak test the fittings of the repaired or replaced component using the J 39400-A.
