chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Automatic Transmission - 4L60-E/4L65-E|Page 3846 > < Automatic Transmission - 4L60-E/4L65-E|Page 3844
Page 1
background image

Pressure Regulating Solenoid: Service and Repair
Automatic Transmission - 4L80-E/4L85-E

Pressure Regulator Replacement

^

Tools Required
-

J 36850 Transjel

Removal Procedure

1. Raise the vehicle. 
2. Remove the transmission oil pan and the filter.    

3. Caution:  Valve springs can be tightly compressed. Use care when removing retainers and plugs. Personal injury could result.

Remove the reverse boost valve bushing retainer ring (2).

4. Remove the following from the reverse boost valve cylinder:

-

The reverse boost valve bushing

-

The reverse boost valve

-

The pressure regulator spring retainer

-

The pressure regulator spring

-

The pressure regulator valve

-

The reverse boost valve bushing

Installation Procedure

1. Install the pressure regulator valve with J 36850.

2. Pre-assemble the following parts:

-

The reverse boost valve bushing

-

A new reverse boost valve

-

A new pressure regulator spring retainer

-

The added isolator pressure regulator spring

Automatic Transmission - 4L60-E/4L65-E|Page 3846 > < Automatic Transmission - 4L60-E/4L65-E|Page 3844