chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Torque Converter Clutch Solenoid, A/T > < Component Locations|Page 4028
Page 3
background image

Notice:  Refer to Fastener Notice in Service Precautions.

6. Install the pressure control solenoid retainer and retaining bolt.

^

Tighten the pressure control solenoid retaining bolt to 11 Nm (97 inch lbs.).

7. Connect the internal wiring harness electrical connectors to the following components:

^

Transmission fluid pressure switch (1)

^

1-2 shift control solenoid (2)

^

2-3 shift control solenoid (3)

^

Pressure control solenoid (4)

^

TCC PWM solenoid (5)

^

3-2 control solenoid (6)

8. Install the 1-2 accumulator. 
9. Install the transmission oil pan and filter.    

10. Fill the transmission to the proper level with DEXRON III transmission fluid.

Torque Converter Clutch Solenoid, A/T > < Component Locations|Page 4028