Express 1500 AWD V8-5.3L VIN T (2004)
Seals and Gaskets: Service and Repair
Transfer Case Input Shaft Seal Replacement
Transfer Case Input Shaft Seal Replacement
^
J45758 Seal Installer
^
J36825 Output Shaft Oil Seal Remover
^
J23907 Slide Hammer
Removal Procedure
Notice: Refer to Transfer Case Seal Removal Notice in Service Precautions.
1. Raise the vehicle.
2. Remove the transfer case from the adapter.
3. Using the J36825 (2) and J23907 (1) remove the input shaft seal.
3.1.
Poke a hole in the seal using a very small punch.
3.2.
Thread the tool J36825 (2) into the hole.
Installation Procedure
Important: When installing the input shaft seal, make sure that the part numbers on the seal are facing outward toward the technician.
1. Position the seal on the input shaft.
2. Using the J4575fl install the input shaft seal in the transfer case.
3. Install the transfer case to the adapter.
4. Lower the vehicle.
