Express 1500 RWD V6-4.3L (2007)
1. Install the fuel level sensor (1).
2. Install the retaining clip to the fuel level sensor.
3. Connect the electrical connector to the fuel level sensor.
4. Connect the electrical connector retaining clip to the fuel level sensor.
5. Connect the fuel pump electrical connector.
6. Install the fuel sender assembly.
7. Install the fuel tank.
8. Refill the fuel tank.
9. Install the fuel filler cap.
10. Connect the negative battery cable.
11. Inspect for leaks:
1. Turn ON the ignition for 2 seconds.
2. Turn OFF the ignition for 10 seconds.
3. Turn ON the ignition.
4. Inspect for fuel leaks.
