Express 1500 RWD V6-4.3L VIN X (2005)
Antenna Mast: Service and Repair
FIXED ANTENNA MAST REPLACEMENT
REMOVAL PROCEDURE
1. Unscrew the antenna mast.
NOTE: Use tape on the tool surface so that you do not damage the paint on the antenna mast.
2. Remove the antenna mast from the antenna base.
INSTALLATION PROCEDURE
1. Install the antenna mast to the antenna base.
IMPORTANT: Use tape on the tool surface in order to protect the paint on the antenna mast from damage.
2. Screw the antenna mast to the antenna base.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the antenna mast to 5 N.m (44 lb in).
