Express 1500 RWD V6-4.3L VIN X (2005)
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
2. Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure.
3. Drain the fuel tank. Refer to Fuel Tank Draining Procedure.
4. Remove the fuel tank.
5. Disconnect the fuel feed pipe at the fuel filter.
6. Disconnect the chassis fuel return pipe (4) at the rear fuel return pipe (2).
7. Remove the fuel pipe retaining clips (1).
8. Remove the fuel feed and return pipes.
INSTALLATION PROCEDURE
1. Install the fuel feed and return pipes and the fuel pipe retaining clips (1).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the bolts to 12 N.m (106 lb in).
2. Connect the chassis fuel return pipe to the rear fuel return pipe.
3. Connect the fuel feed pipe to the fuel filter.
4. Install the fuel tank.
5. Lower the vehicle.
6. Refill the fuel tank.
7. Tighten the fuel filler cap.
8. Connect the negative battery cable.
