Express 1500 RWD V6-4.3L VIN X (2005)
1. Install the battery ground (negative) cable and bolt to the battery.
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
NOTE: Refer to Fastener Notice in Service Precautions.
IMPORTANT: Clean any existing corrosion from the battery terminal bolt flange and the battery cable end.
Tighten the battery terminal bolt to 17 N.m (13 lb ft).
2. Install the battery ground (negative) cable and bolt to the battery for the auxiliary battery.
IMPORTANT: Clean any existing corrosion from the battery terminal bolt flange and the battery cable end.
Tighten the battery terminal bolt to 17 N.m (13 lb ft).
