Express 1500 RWD V6-4.3L VIN X (2005)
4. Notice: Refer to Fastener Notice in Service Precautions.
Install the intermediate shaft bearing lower brace retaining nut.
^
Tighten the nut to 30 Nm (22 ft. lbs.).
5. Install the intermediate shaft bearing bracket retaining nuts.
^
Tighten the nuts to 30 Nm (22 ft. lbs.).
6. Install the upper intermediate shaft to the intermediate shaft bearing retaining bolt.
^
Tighten the bolt to 30 Nm (22 ft. lbs.).
7. Install the intermediate shaft seal upper retaining screws.
^
Tighten the screws to 2 Nm (18 inch lbs.).
8. Reposition the cruise control module (3) and install the cruise control module mounting nuts (2).
^
Tighten the nuts to 5 Nm (44 inch lbs.).
