Express 1500 RWD V6-4.3L VIN X (2005)
13. Inspect the TCC solenoid and wiring harness assembly for the following defects:
^
Damage
^
Cracked connectors
^
Exposed wires
^
Loose pins
Installation Procedure
1. Install the wiring harness and TCC solenoid assembly with a new O-ring seal to the transmission.
2. Install the pass-through electrical connector to the transmission case.
3. Notice: Refer to Fastener Notice in Service Precautions.
Install the valve body bolts which retain the internal wiring harness and install the TCC solenoid retaining bolts.
^
Tighten the control valve body retaining bolts to 11 Nm (97 inch lbs.).
