Express 1500 RWD V6-4.3L VIN X (2005)
^
Outer ring oil seal (1)
^
Servo piston (2)
^
Bottom retaining clip (3)
^
Cover gasket (4)
^
Cover (5)
^
Cover Bolt (6)
2. Notice: Refer to Fastener Notice in Service Precautions.
Install the cover bolts (61).
^
Tighten the bolts to 24 Nm (18 ft. lbs.).
3. Install the transmission oil pan and filter.
4. Lower the vehicle.
5. Fill the transmission to the proper level with Dexron® III transmission fluid.
Forward Servo Replacement
Forward Servo Replacement
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the oil pan and filter.
3. Remove the six forward servo cover bolts, cover, and gasket.
4. Remove the following parts:
1. Forward servo piston pin (5)
2. O-ring seal (4)
3. Servo piston (3)
4. Retainer (2)
5. Piston spring (1)
Installation Procedure
1. Install the following parts:
^
Piston spring (1)
^
Retainer (2)
^
Servo piston (3)
^
O-ring seal (4)
^
Forward servo piston pin (5)
2. Notice: Refer to Fastener Notice in Service Precautions.
