chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Wheel Speed Sensor Replacement (2WD)|Page 10894 > < Wheel Speed Sensor Replacement (2WD)|Page 10892
Page 4
background image

8. Install the WSS cable mounting clip to the frame attachment point.
9. Connect the WSS cable electrical connector.

10. Install the brake rotor (2) shown on the 1500 Series. Refer to Front Brake Rotor Replacement  (See: Disc Brake System/Brake Rotor/Disc/Service

and Repair/Removal and Replacement/Front Brake Rotor Replacement) .

11. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation   .
12. Perform the vehicle diagnostic system check. Refer to Diagnostic System Check - Vehicle   .

Wheel Speed Sensor Replacement (2WD)|Page 10894 > < Wheel Speed Sensor Replacement (2WD)|Page 10892