Express 1500 RWD V8-5.3L (2008)
Notice: Refer to Fastener Notice .
2. Install the bolt to the combination valve and the frame.
Tighten the bolt to 10 N.m (88 lb in).
3. Connect the front and rear brake pipes to the combination valve.
Tighten the brake pipe fittings to the combination valve to 30 N.m (22 lb ft).
4. Connect the electrical connector to the combination valve.
5. Bleed the brake hydraulic system. Refer to Hydraulic Brake System Bleeding (Manual) (See: Brake Bleeding/Service and Repair)Hydraulic Brake
System Bleeding (Pressure) (See: Brake Bleeding/Service and Repair) .
