Express 1500 RWD V8-5.3L (2008)
2. Install the booster assembly.
Notice: Refer to Fastener Notice .
3. Install the 4 booster to bulkhead nuts.
Tighten the nuts to 36 N.m (26 lb ft).
4. Install the stop lamp switch. Refer to Stop Lamp Switch Replacement .
5. Install the master cylinder. Refer to Master Cylinder Replacement (See: Hydraulic System/Brake Master Cylinder/Service and Repair/Removal
and Replacement/Master Cylinder Replacement) .
6. Connect the power brake booster outlet hose, the steering gear inlet hose, and the power brake booster inlet hose.
*
Tighten the power brake booster inlet hose to 28 N.m (20 lb ft).
*
Tighten the steering gear inlet hose to 28 N.m (20 lb ft).
7. Bleed the hydraulic booster system. Refer to Power Steering System Bleeding .
8. Release the park brake and unblock the wheels.