Express 1500 RWD V8-5.3L (2008)
Caution: Do not push or pull on the reluctor wheel of the camshaft position (CMP) actuator during removal or installation. The reluctor wheel is
retained to the front of the CMP actuator by 3 roll pins. Pushing or pulling on the wheel may dislodge the wheel from the front of the actuator. The
actuator return spring is under tension and may rotate the dislodged reluctor wheel, causing personal injury.
3. Loosen and separate the CMP actuator and timing chain from the camshaft. Position your fingers behind the actuator sprocket and pull the actuator
away from the front of the camshaft. Never pull on the reluctor wheel when attempting to remove the actuator.
