Express 1500 RWD V8-5.3L (2008)
12. Remove the gasket (1) from the rocker cover.
13. Discard the OLD gasket.
Installation Procedure
Important:
*
All gasket surfaces should be free of oil an/or other foreign material during assembly.
*
DO NOT reuse the valve rocker arm cover gasket.
*
The valve rocker arm cover bolt grommets may be reused.
*
If the PCV valve grommet has been removed from the rocker cover, install a NEW grommet during assembly.
1. Install a NEW rocker cover gasket (1) into the groove of the valve rocker arm cover.