Express 1500 RWD V8-5.3L (2008)
5. Install the vent hose to the valve rocker arm cover.
6. Apply threadlock to the threads of the bracket bolts. Refer to Sealers, Adhesives, and Lubricants (See: Specifications/Sealers, Adhesives, and
Lubricants) for the correct part number.
7. Install the ignition coils and bracket to the rocker arm cover.
8. Install the ignition coil bracket studs to the rocker cover.
Tighten the ignition coil bracket studs to 12 N.m (106 lb in).
