Express 1500 RWD V8-5.3L (2008)
3. Connect the electrical connectors to the EBCM.
4. For cutaway vehicles, install the splash shield.
Tighten the splash shield bolts to 25 N.m (18 lb ft).
5. Lower the vehicle.
6. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
7. Revise the tire calibration using the Tire Size Calibration function.
8. Verify correct system operation. Refer to Diagnostic Starting Point - Antilock Brake System (See: Brakes and Traction Control/Antilock Brakes /
Traction Control Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview) .
9. Refer to Control Module References for programming and setup information.
