Express 1500 RWD V8-5.3L (2008)
13. On models equipped with the 4.8L, or 6.0L engine, install the positive lead to the junction block.
Tighten the junction block nut to 10 N.m (89 lb in).
14. On all models, connect the battery positive cable to the battery.
Tighten the battery terminals to 17 N.m (13 lb ft).
15. Connect the battery negative cable to the battery.
16. Install the coolant recovery reservoir or surge tank and the bolt.
Tighten the coolant recovery reservoir or surge tank bolt to 11 N.m (97 lb in).
