Express 1500 RWD V8-5.3L (2008)
6. Remove the upper ball joint retaining nut.
7. Disconnect the upper control arm from the steering knuckle using the J 43631 and J 45851 .
8. Remove the upper control arm nuts and the adjustment cams.
9. Remove the upper control arm bolts.
10. Remove the upper control arm.
Installation Procedure
1. Install the upper control arm.
2. Install the upper control arm bolts.
Notice: Refer to Fastener Notice .
3. Install the upper control arm nuts and the adjustment cams.
Tighten the nuts to 175 N.m (129 lb ft).
