Express 1500 RWD V8-5.3L VIN T (2004)
Cargo Lamp: Service and Repair
CARGO LAMP REPLACEMENT
REMOVAL PROCEDURE
1. Disconnect the electrical connector.
2. Using a plastic flat bladed tool, release the double sided tape that retains the light assembly to the vehicle.
INSTALLATION PROCEDURE
1. Install the light assembly into the vehicle with double sided tape.
IMPORTANT: In order to insure a good replacement of new adhesive or of old adhesive, verify that the surface meets the following conditions:
-
The temperature of the surface is approximately 24-41°C (80-105°F).
-
The surface is clean.
-
The surface is free of wax or of oily film.
1. Connect the electrical connector.
