Express 1500 RWD V8-5.3L VIN T (2004)
4. Disconnect the EVAP purge solenoid electrical connector.
5. Remove the EVAP purge solenoid mount bolt (2).
6. Remove the EVAP purge solenoid (3) and the insulator (1) from the engine.
INSTALLATION PROCEDURE
1. Install the insulator (1) on the EVAP canister purge valve (3).
2. Install the EVAP canister purge valve (3) to the engine.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the EVAP canister purge valve mount bolt (2).
Tighten
Tighten the EVAP canister purge valve mount bolt to 10.5 N.m (93 lb in).
