chevrolet Workshop Repair Guides

Chevrolet Express 1500 RWD V8-53L VIN T Workshop Service and Repair Manuals

ABOUT US
Electronic Brake Control Module (EBCM)|Page 482 > < Electronic Brake Control Module (EBCM)|Page 480

Electronic Brake Control Module (EBCM) - Service and Repair

Page 3
background image

Refer to Fastener Notice in Service Precautions.

Install the screws to the EBCM (2).
^

Tighten the screws to 5 Nm (44 inch lbs.) in an X-pattern.

3. Connect the electrical connectors to the EBCM.

4. For cutaway vehicles, install the splash shield.

^

Tighten the splash shield bolts to 25 Nm (18 ft. lbs.).

5. Lower the vehicle.
6. Connect the negative battery cable.
7. Revise the tire calibration using the Scan Tool Tire Size Calibration function.
8. Verify correct system operation.

Electronic Brake Control Module (EBCM)|Page 482 > < Electronic Brake Control Module (EBCM)|Page 480