Express 1500 RWD V8-5.3L VIN T (2004)
11.
Re-attach the J-strips under the seat and secure the hook and loop fasteners.
12.
Repeat Steps 2-10 on any other bench seats.
13.
Install all bench seats to the floor.
^
Position the seat into the open slots in both rails in the floor.
A.
Push the seat forward in the rail, hooking both seat bases onto the pins inside of the rail.
B.
Locate the hole in the rail for the locking pin.
C.
Insert the correct locking pin into the seat base and push the seat to line up the pin with the base. The pin with the black cap marked "R"
must be installed on the passenger's side and the pin with the gray cap marked "L" on the driver's side.
D.
Push the pin down until it is in the retaining clip.
E.
If the vehicle has a floor mat, put the flap back to its original position.
14.
Move the front seats back to their original positions.
