Express 1500 RWD V8-5.3L VIN T (2004)
REMOVAL PROCEDURE
1. Remove the rear corner garnish molding.
2. Remove the seat belt retractor bolts (1) from the seat belt retractor.
3. Remove the seat belt retractor from the vehicle.
INSTALLATION PROCEDURE
1. Install the seat belt retractor to the vehicle.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the seat belt retractor bolts (1) to the vehicle.
Tighten
Tighten the seat belt retractor bolt to 52 N.m (38 lb ft).
3. Install the rear corner garnish molding.
No. 5 Right Rear
SEAT BELT RETRACTOR REPLACEMENT - NO. 5 RIGHT REAR
REMOVAL PROCEDURE
