Express 1500 RWD V8-5.3L VIN T (2004)
15. Drive out the needle bearing (2).
Installation Procedure
1. Coat the double lip seal (2) and the washer (3) with grease.
2. Install the needle bearing (2) to the power steering gear housing (1) using J 6278.
3. Install the double lip seal (2).
4. Install the backup washer (3).
5. Install the retaining ring using the J 4245.
6. Install the pitman shaft and the side cover.
7. Install the dust seal (1).
8. Install the Pitman Arm.
9. Bleed the power steering system.