Express 1500 RWD V8-5.3L VIN T (2004)
1. Important: Make sure the shock dampener is on the rack before installing the inner tie rod.
The threads must be clean prior to the Loctite® application. Check the Loctite®, or equivalent, container for expiration date. Use only enough
Loctite® to evenly coat the threads.
Apply Loctite® 262 or equivalent to the inner tie rod threads (2).
2. Install the inner tie rod (3) to the power steering gear (1).
3. Notice: Refer to Fastener Notice in Service Precautions.
Install a torque wrench (1) to the J 34028 to tighten the inner tie rod (2).
-
Tighten the inner tie rod to 100 Nm (74 ft. lbs.).
