Express 1500 RWD V8-5.3L VIN T (2004)
10. Notice: Refer to Fastener Notice in Service Precautions.
Notice:
Torque valve body bolts in a spiral pattern starting from the center.
If the bolts are torqued at random, valve bores may be distorted and inhibit valve operation.
Tighten the control valve body bolts in a spiral pattern starting from the center, as indicated by the arrows.
^
Tighten the control valve body bolts (in sequence) to 11 Nm (97 inch lbs.).
11. Ensure that the manual detent spring is aligned properly with the detent lever.
^
Tighten the manual detent spring bolt to 11 Nm (97 inch lbs.).
12. Install the TCC solenoid with a new O-ring seal to the valve body.
