Express 1500 RWD V8-5.3L VIN T (2004)
7. Remove the inner pinion bearing cup from the axle housing using a hammer and a brass drift in the slots provided. Move the drift back and forth
between one side of the cup and the other in order to work the cups out of the housing evenly.
Installation Procedure
1. Install the outer pinion bearing cup using the J8611-01 (1) and the J8092 (2).
2. Install the inner pinion bearing cup using the J45870 (2), and the J8092 (1).
3. Determine the selective shim thickness for the drive pinion.
4. Install the selective shim between the inner pinion bearing and the shoulder on the gear.
