Express 1 Ton Van V8-5.7L VIN R (1999)
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the bolt in order to retain the rear run channel (1) to the door.
Tighten
Tighten the retaining bolt to 11 N.m (97 lb in).
3. Install the front door window to the door from the outside of the vehicle.
4. Install the nuts (3) in order to retain the front door window to the sash.
Tighten
Tighten the retaining nuts to 11 N.m (97 lb in).
IMPORTANT: Before raising or lowering the front door window ensure that the front door window is properly aligned in the rear run channel (1).
5. Lower the front door window.
6. Install the front run channel (1) to the door.
7. Install the bolt (2) in order to retain the front run channel (1) to the door.
Tighten
Tighten the retaining bolt to 11 N.m (97 lb in).
8. Install the inner window sealing strip.
9. Install the outer window sealing strip.
10. Install the front door water deflector.
11. Install the front door rear garnish.
