Express 1 Ton Van V8-5.7L VIN R (1999)
Front Door Weatherstrip: Service and Repair
Weatherstrip Replacement - Front Door Opening
REMOVAL PROCEDURE
1. Remove the front door opening upper frame garnish molding.
2. Remove the hinge pillar trim panel.
3. Remove the windshield garnish molding.
4. Remove the front door upper pillar garnish molding.
5. Remove the front door lower pillar garnish molding.
6. Remove the front door stepwell mat.
7. Gently pull the door opening weatherstrip from the door opening pinch-weld flange.
8. Remove the door opening weatherstrip from the vehicle.
INSTALLATION PROCEDURE