Express 1 Ton Van V8-5.7L VIN R (1999)
Parking Brake Pedal: Service and Repair
REMOVAL PROCEDURE
1. Complete the parking brake lever pin up procedure.
2. Remove the parking brake release handle.
3. Remove the front brake cable from the parking brake lever.
4. Remove the parking brake lever retaining nuts.
5. Remove the parking brake lever from the vehicle.
INSTALLATION PROCEDURE
1. Pin up the NEW parking brake lever.
2. Install the parking brake lever to the vehicle.
NOTICE: Refer to Fastener Notice in Service Precautions.
3. Install the parking brake lever retaining nuts.
^
Tighten the parking brake lever retaining nuts to 25 Nm (18 ft. lbs.).
4. Connect the front brake cable to the parking brake lever.
5. Install the parking brake release handle.
6. Install the left side kick panel by snapping into the pillar.
7. Remove the pin from the parking brake lever.
8. Move the parking brake lever into the FULL up position.
9. Verify that the vehicle will hold position with the brake lever depressed.
10. If additional adjustments need to be made, refer to Park Brake Cable Service/Adjustment.
