Express 1 Ton Van V8-5.7L VIN R (1999)
Headlamp Bulb: Service and Repair
Headlamp Bulb Replacement (Export)
REMOVAL PROCEDURE
1. Remove the screws holding the retaining ring to the headlamp housing assembly.
2. Remove the retaining ring from the headlamp housing assembly.
3. Remove the headlamp capsule (1) from the headlamp housing assembly.
4. Remove the electrical connector from the headlamp bulb (2).
5. Remove the rubber boot from the headlamp capsule (1).
6. Push down and out on the ends of the bulb retaining clip in order to disengage the bulb retaining clip from the headlamp capsule (1).
7. Remove the headlamp bulb (2) from the headlamp capsule (1).
INSTALLATION PROCEDURE
1. Install the headlamp bulb (2) to the headlamp capsule (1).
2. Push down and out on the ends of the bulb retaining clip in order to engage the bulb (2) retaining clip to the headlamp capsule (1).
3. Install the rubber boot to the headlamp capsule (1).
4. Install the electrical connector to the headlamp bulb (2).
5. Install the headlamp capsule (1) to the headlamp housing.
6. Install the retaining ring to the housing assembly.
7. Install the screws holding the retaining ring to the headlamp housing assembly.
