chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Steering Wheel and Column - Standard|Page 593 > < Steering Wheel and Column - Standard|Page 591
Page 1
background image

Horn Switch: Service and Repair
Steering Wheel and Column - Tilt

REMOVAL PROCEDURE

1. Disable the SIR system. Refer to Air Bag(s) Arming and Disarming.
2. Remove the inflator module. Refer to Infl Rst Steering Wheel Module Replacement in Air Bags and Seat Belts.
3. Remove the horn plunger from the steering column by pressing inward to the stop and rotating horn plunger 90 degrees.

4. Remove the horn contact plate retaining screws from the steering wheel.
5. Remove the horn plunger from the steering wheel.    

INSTALLATION PROCEDURE

1. Install the horn plunger to the steering wheel. 

NOTICE:  Refer to Fastener Notice in Service Precautions.

Steering Wheel and Column - Standard|Page 593 > < Steering Wheel and Column - Standard|Page 591