Express 1 Ton Van V8-5.7L VIN R (1999)
IMPORTANT: Fluid must be free from bubbles and foam. Be aware of periodic bubbles that indicate a loose connection or leaking O-ring seal
in the return hose or the pressure hose.
Fluid must be free from discoloration.
7. Observe the fluid.
8. If the condition persists, replace the following parts:
-
The return hose clamps
-
The return hose O-rings
-
The pressure hose O-rings
-
The gear cylinder line O-rings
-
The reservoir to pump O-ring
9. Repeat the bleed procedure from the beginning.
10. Drive the vehicle approximately 16 kilometers (10 miles) to warm the system to operating temperature. Evaluate the vehicle on a smooth flat
surface.
11. Verify the following conditions:
-
There is smooth power assist.
-
The vehicle operates quietly.
-
The pump maintains the proper fluid level.
-
There is no leaking in the steering system.
-
The fluid is free of foam or discoloration.
