Express 1 Ton Van V8-5.7L VIN R (1999)
Front Steering Knuckle: Service and Repair
REMOVAL PROCEDURE
-
Tools Required
-
J 23742 Ball Joint Separator
1. Raise the front of the vehicle. Place safety stands under the control arms.
2. Remove the tire and wheel assembly.
3. Disconnect the tie rod from the steering knuckle. Refer to Tie Rod Replacement.
NOTICE: Support the caliper with a piece of wire to prevent damage to the brake line.
4. Remove the front brake caliper.
5. Remove the hub/rotor. Refer to Wheel Hub, Bearing, and Seal Replacement.
6. Remove the steering knuckle seal. Do not damage the seal.
7. Remove the three bolts that attach the splash shield to the knuckle.
