Express 1 Ton Van V8-5.7L VIN R (1999)
Automatic Transmission Dipstick - Dipstick Tube: Service and Repair
Automatic Transmission-4L60-E
Removal Procedure
1. Remove the transmission oil level indicator.
2. Remove the nut securing the oil lever indicator tube to the transmission.
3. Remove the top half of the oil level indicator tube.
4. Remove the lower half of the oil level indicator tube and seal from the transmission.
Installation Procedure
1. Install a new seal into the transmission case.
2. Install the lower oil level indicator tube into the transmission.
3. Install the upper half of the oil level indicator tube into the lower half oil level indicator tube.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the nut securing the oil level indicator tube to the transmission.
^
Tighten the nut to 32 Nm (23 ft. lbs.).
5. Install the transmission oil level indicator.
