Express 1 Ton Van V8-5.7L VIN R (1999)
Shift Cable: Service and Repair
Automatic Transmission-4L60-E
Removal Procedure
1. Ensure that the transmission is in the mechanical neutral position.
^
Rotate the transmission control lever clockwise until it reaches the full clockwise stop position.
^
Move the shift lever counterclockwise two detents.
2. Remove the clip that secures the shift cable to the steering column bracket.
3. Remove the shift cable end from the steering column shift controller stud ball.
4. Raise the vehicle. Refer to Vehicle Lifting.
5. Remove the shift cable from the transmission bracket.
6. Remove the shift cable end from the transmission shift lever stud ball.
7. Remove the grommet from the hole in the floor panel.
8. Remove the cable from the vehicle.
Installation Procedure
