Express 1 Ton Van V8-5.7L VIN R (1999)
1. Install the accumulator, spacer plate, and gaskets. Refer to Accumulator Assembly, Spacer Plate, and Gaskets
2. Install the manual valve link and the control valve body to the transmission case.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the remaining control valve body bolts in sequence.
^
Tighten the bolts to 11 Nm (8 ft. lbs.).
4. Install the manual shift detent spring assembly.
5. Install the manual shift detent spring bolt.
6. Install the torque converter clutch solenoid (1) and retainer clip (2).
7. Install the wiring harness and bolts.
^
Tighten the bolts to 11 Nm (8 ft. lbs.).
