Express 2500 V6-4.3L VIN X (2005)
Power Steering Pump: Service and Repair
Power Steering Pump Replacement
Power Steering Pump Replacement (4.3L)
Removal Procedure
1. Place a drain pan below under the vehicle.
2. Remove the power steering pump pulley .
3. Raise and support the vehicle. Refer to Vehicle Lifting.
4. Remove the tire and wheel.
5. Disconnect the reservoir outlet hose from the power steering pump through the wheel well.
6. Disconnect the power steering gear outlet hose or cooler hose from the power steering pump through the wheel well.
7. Disconnect the power brake booster inlet hose (2) from the power steering pump (1) through the wheel well.
8. Cap the ends of the hose and the power steering pump in order to prevent the entrance of dirt.
9. Lower the vehicle.
