Express 2500 V8-4.8L (2007)
Parking Brake Cable: Removal and Replacement
Parking Brake Front Cable Replacement
Parking Brake Front Cable Replacement
Removal Procedure
1. Release the park brake.
2. Remove the park brake pedal.
3. Roll the carpet back to access the cable anchor nut and grommet.
4. Remove the cable anchor nut.
5. Remove the cable and grommet from the floor (1).
6. Raise and support the vehicle. Refer to Vehicle Lifting.
7. Disconnect the front cable (2) from the intermediate cable (3).
8. Remove the cable from the frame bracket by depressing the retaining tabs.
9. Remove the cable.
Installation Procedure