Express 2500 V8-4.8L (2007)
5. Install the EVAP purge solenoid (3), isolator (1), and bolt (2) to the intake manifold.
Tighten the EVAP purge solenoid bolt to 10 N.m (89 lb in).
6. Install the EVAP purge solenoid vent tube to the solenoid (1) and vapor pipe.
7. Install the engine coolant air bleed clamp and hose to the throttle body, if applicable.
Important: Lightly coat the MAP sensor seal with clean engine oil before installing.
8. Install the MAP sensor (1) to the intake manifold.
